DELTA PLUS PVCC400

₱429.00

PVCC40010

Product images are for illustrative purposes only and may differ from the actual product.

Click here to view the Size Guide

Specifications

Chemical PVC gloves. PVC on interlock cotton lining. Length: 40 cm / 400mm.
Support: Interlock cotton.
Coating: 100% PVC.Category: Tight glove supported
Glove kind: Tight glove
Tight glove kind: Supported
Coating material and finish: PVC smooth
Coating level: Fully coated
Number of layers: Single layer
Arm level protection: Elbow cuff (<= 500mm)
Thickness (μ): 1,20 -> 1,40 mm
Thickness (inch): 0.0472
Benefits element: Reach – Long cuff (>290mm)

Product Use

Building
Maintenance
Chemical industry
Oil & Gas (extraction)
Mining
Petrochemical

Protects From The Following Risks

Biological
Wearing
Chemical
Particules

Product Highlights & User Benefits

PVC

Good resistance to abrasion
Material very resistant to oils, chemicals, and petroleum derivatives

Forearm protection

Performance

Extra thick and long for extra protection of the entire arm

Certifications and Standards

EN420:2003+A1:2009 General requirements

Dexterity (from 1 to 5)

EN388:2016 Protective gloves against mechanical Risks (Levels obtained on the palm)

	4	Resistance to abrasion (from 1 to 4)
	1	Resistance to cutting (from 1 to 5)
	3	Resistance to tear (from 1 to 4)
	1	Resistance to puncture (1 to 4)
	X	Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F)

EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro-organisms – Part 1: Terminology and performance requirements for chemical risks.

TYPE	B	Type B – Water and air tightness according to EN ISO 374-2:2019. Permeation resistance to at least 3 chemicals at level 2 according to EN16523-1: 2015 (from 1 to 6).
	.	Determination of resistance to degradation by chemicals according to EN ISO 374-4: 2019. Part 4: Determination of resistance to degradation by chemicals.
A	4 > 120 mn	Méthanol (A) CAS 67-56-1
K	6 > 480 mn	Sodium hydroxide 40% (K) CAS 1310-73-2
L	6 > 480 mn	Sulphuric acid 96 % (L ) CAS 7664-93-9

EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms – Part 5: Terminology and performance requirements against micro- organisms risks.

BACTERIA + FUNGI

BACTERIA + FUNGI: Water and air tightness according to EN ISO 374-2:2019.