DELTA PLUS VENIZETTE VE920

₱419.00

VE920

Product images are for illustrative purposes only and may differ from the actual product.

Click here to view the Size Guide

Specifications

Latex on interlock cotton lining. Length: 30 cm. Thickness: 1,25 mm.

Tested according to EN374-3:2003 determination of permeation resistance, levels of permeation from 1 to 6 (A: Methanol = 2, K: Sodium hydroxide 40% (NaOH) = 6, L: Sulphuric Acid 96% = 6, sodium hydroxide (20%) = 6, Hydrochloric acid 10% = 6, Formaldehyde 37% = 6, acetic acid 25% = 6).

Support: 100% Interlock cotton.
Category: Tight glove supported

Glove kind: Tight glove

Tight glove kind: Supported

Coating material and finish: Smooth latex / 100% natural latex.

Coating level: Fully coated

Number of layers: Single layer

Arm level protection: Forearm cuff (< 400mm)

Thickness (μ): 1,25

Thickness (inch): 0.0492

Product Use

Agriculture
Public works
Building
Finishing works / Craftsmanship
Manufacturing/Transformation
Accommodation & Food services
Maintenance
Chemical industry
Automotive
Oil & Gas (extraction)
Mining
Petrochemical
Water and waste treatment
Forestry

Protects From The Following Risks

Heat
Biological
Wearing
Chemical
Particules

Product Highlights and User Benefits

Versatile glove

Resistance to chemicals and contact heat of 100°C for 15 seconds

Hygiene

Reduces perspiration thanks to its excellent breathability

Performance

Extra thick and long for extra protection of the entire arm

Durability

High-quality coating extends the life of the glove and provides excellent protection for the hand

Certifications and Standards

EN420:2003+A1:2009 General requirements

Dexterity (from 1 to 5)

EN388:2016 Protective gloves against mechanical Risks (Levels obtained on the palm)

	4	Resistance to abrasion (from 1 to 4)
	1	Resistance to cutting (from 1 to 5)
	2	Resistance to tear (from 1 to 4)
	1	Resistance to puncture (1 to 4)
	X	Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F)

EN407:2004 Protective gloves against Heat & Fire risks (X = Unrealized test)

	X	Resistance to flammability (from 1 to 4)
	1	Contact heat resistance (from 1 to 4)
	X	Convective heat resistance (1 to 4)
	X	Radiant heat resistance (from 1 to 4)
	X	Small splashes of molten metal (from 1 to 4)
	X	Large quantities of molten metal (from 1 to 4)

EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro-organisms – Part 1: Terminology and performance requirements for chemical risks.

TYPE	A	Type A – Water and air tightness according to EN ISO 374-2:2019. Permeation resistance to at least 6 chemicals at level 2 according to EN16523-1: 2015,
	.	Determination of resistance to degradation by chemicals according to EN ISO 374-4: 2019. Part 4: Determination of resistance to degradation by chemicals.
A	2 > 30 mn	Méthanol (A) CAS 67-56-1
K	6 > 480 mn	Sodium hydroxide 40% (K) CAS 1310-73-2
L	4 > 120 mn	Sulphuric acid 96 % (L ) CAS 7664-93-9
M	6 > 480 mn	Nitric acid 65% (M) CAS 7697-37-2
N	3 > 60 mn	Acetic acid 99% (N) CAS 64-19-7
P	6 > 480 mn	Hydrogen peroxide 30% (P) 7722-84-1
T	6 > 480 mn	Formaldehyde 37% (T) CAS 50-00-0

EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms – Part 5: Terminology and performance requirements against micro- organisms risks.

BACTERIA + FUNGI

BACTERIA + FUNGI: Water and air tightness according to EN ISO 374-2:2019.

GLOB MIGR Food contact – Overall Migration

Contact with any food type